hot air tool
300W Hot Air Heat Gun Electric Power Temperature Blower Mini Tool for DIY Shrink Tubing Soldering Wrap Plastic Rubber Stamp
# Parameters
★ Main Product: Hot Air Gun
★ Plug Type: EU
★ Heat Gun Power: 300W
★ Widely Application: DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, etc
★ Achievable Temperature: 200℃
# About This Item
★ Safety Hot Air Gun:
Hot air shrink gun was made of high-quality stainless steel and ABS plastic. Dimensions 225x45mm / 8.86x1.77in (Approx.)
★ Cooling Holes:
The temp of the nozzle could reach 200° in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life!
★ Easy to Use:
The handing part adopts salient point nonskid designs that cause safe handholding with small energizing!
# How to Use the Heat Tool
★ Plug in the heat tool. Hold the product as shown on the pict. (Do not touch the hot nozzle.)
★ Keeping 3-5cm distance from work and about a 45-degree angle to heat until it is completed. (Do not blow the hot air gun directly at 90° to the object.)
★ Warm Tips:
The temp of the nozzle could reach 200° in seconds, please don't use it for more than 10 minutes at one time.
If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it.
It can not be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits.
LCD Display Heat Gun 2000w Hot Air Gun Tool Handheld Electrical Heat Air Machine with 2-temp Settings 4 Nozzles
Note:All hot air guns are delivered in bubble column packaging (except for overseas warehouses), because the paper box will increase a lot of freight. In order to give you the most affordable price, they are packed in bubble column without instructions. The pictures of the instructions will be displayed in the description. Thank you for your understanding.
Application: remove paint, peel old vallpaper, remove plastics floor tile, bend pvc pipe,melt litter in pipe, remove greasy litter, for shrink w-rap.
Features:
Stepless temperature adjustable knob, 60-600℃ contant temperature adjustment can weld a variety of plastics types.
Digital display design can b-etter adjust the temperature.
Fine quality heating elements ensure reliable and s-afe operation.
The temperature and air v-olume can be easily adjusted.
Power output is stable, quick speed, suitable for long time operation, to prevents overheating burned.
Can be applied in soldering, welding PVC, shaping, drying, shrink-fitting, stripping paint, etc.
With high temperature resistant heat insulation s-hield and dustproof i-nlet, s-afe to use.
With a h-anging loop for convenient storage.
Specifications:
Main material: metal+plastics
Plug: EU-plug, 220V, 50Hz
Power: 2000W
Temperature: 60-600℃
Air v-olume: 350L/min, 500L/min (adjustable)
Noise: 30dB
Packing List:
1 * Hot Air Machine
4*nozzles
Mini Heat Gun Hot Air Welding Gun 220V 300W Electric Handheld Power Tool with Heat Shrink Butt for DIY Craft Embossing Shrink
Our products only have EU plugs, please order according to your needs~
Details:
Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed.
Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
The temprature can not be adjusted, but it can reach at about 200°C/392°F within a few seconds abstractly which heat up quickly and works like a charm.
Description :
Material :Steel Plastic
Working temp.: 200 °C/ 392°F
Rated Power: 300W
Rated voltage: 220V 50-60Hz
Plug Type: EU Plug(220v)
Color:Black
Note:
Never touch the hot nozzle or melted glue for your safe.
Keep it stay away from children.
Multifunction DIY Soldering Hot Air Heat Gun Mobile Phone Repair Tool Portable Hair Dryer Shrink Wrapping US/EU Plug 220/ 110V
Feature:
100% new high quality
Heat-up quickly, the maximum temperature can only reach 200°C( can't adjustable)
With ABS material outside and stainless steel inside
Micro-circulation cooling system is adopted
Mini hot air gun is a perfect tool for DIY craft works
Can be used for embossing powder, heat-shrinkable film, clay, bump, rubber stamp, fast-drying paint, glue, catalytic adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle
material: plastic
Colour: Black
Rated power: 300W
Rated voltage: 220V/110V
Plug type: US plug/EU Plug
Length: 24 cm
Air outlet diameter: 12mm
Package Included
1 x hot air gun
Electric Hot Air Tools Soft Ceramics Electric Heating Tool DIY Using Professional Accessories for Rubber Stamp Shrinkable Sheet
|
Electric Hot Air Tools Soft Ceramics Electric Heat Equipment DIY Using Professional for Rubber Stamp Shrinkable Sheet
Feature: 1.Quality Material: This is made of high quality stainless steel inside and plastic outside, heat resistance, lightweight, simple and durable. 2.Easy to Use: When using the heat gun, just press the button to open it, keep the nozzle 5-6cm distance from your items and better to heat it at about a 45 degree angle until completed. The temperature can not be adjusted, but it can reach to about 200°C/392°F in few seconds. 3.Unique Design: The handing part is made with ergonomic non-slip design that ensure safe hand holding with small energizing. Built in radiator to reduce the internal temperature and extend the life. Safe Heat Dissipation. 4.Multi Occasion Usage: This can be used for heating shrinkable film, clay, embossed powder, rubber stamp, remove old painting, heat to shrink film, defrost and remove mud and dirt etc. Built-in stand for self-support and table top use. 5.Good Gifts: If you are a DIY fan, this could be a good tool for you. It can be used for making handmade candle, rubber stamp and so on. Note: Please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously. Specification: Color: White, Black, Pink, Blue, Purple Size: About 225x25mm/8.85x0.98inch Wire length: 1m Power: 300W Air outlet diameter: 11mm Operating temperature: 200 ° C Plug: 110V US, 220V EU Product application: soft ceramic DIY rubber stamp convex powder/embossed powder/heat shrinkable sheet Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 
1 x DIY Heat Tool
.          
|
Industrial Heat Gun 2000W Hot Air Gun Air Dryer for Soldering Thermal Blower Shrink Wrapping Tools with 300PCS Wire Connectors
Product features:
1. The double heating wire rises rapidly
2. Mica heat insulation of gun barrel is safe and reliable
3. ABS nylon engineering handle is comfortable to hold
4. Two gear wind speed regulation is suitable for many scenarios
matters needing attention:
① When using the hot-air gun, try to use it in a dry place.
② When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.
③ The handle of the hot air gun must be kept dry, clean and away from oil or gas.
④ After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.
⑤ Do not block or cover the air inlet and outlet of the hot-air gun.
Safety warning:
1. Don't use it as a hair dryer for blowing my hair.
2. Do not point the hot air gun directly at people or animals
3. Do not use near inflammables and flammable gases
Product parameters:
Working voltage: EU Plug(220-240V / 50Hz) US Plug(110-120V / 50Hz)
Power consumption: 2000W
Temperature range: 60-650 ℃
Temperature regulation mode: Key temperature regulation
Air volume: 100 / 300 L / min
Switch: second gear wind speed adjustable
Shell material: PP + 15% glass fiber
Rear cover shell material: ABS
Motor: Japan 365 Mabuchi-Motor
Heating cylinder: Luo iron plated material
Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework
300PCS Heat shrink terminals
Colors&Size:
Red connector : Suit Cable / Wire Size 22-16 AWG 0.5-1.5m㎡ 35PCS
Blue connector :Suit Cable / Wire Size 16-12 AWG 1.5-2.5m㎡ 30PCS
Yellow connector : Suit Cable / Wire Size 12-10 AWG 4.0m㎡ 10PCS
White connector :Suit Cable / Wire Size 26-24 AWG 0.25-0.34m㎡ 25PCS
Black Tube:200 pcs
JCD Hot air gun 8858 Micro Rework soldering station LED Digital Hair dryer for soldering 700W Heat Gun welding repair tools
Hot air gun
Voltage: AC220-240V / AC100-130V
Frequency: 50Hz / 60Hz
Output power: 750W
Temperature range: 100 ° C to 480 ° C
Temperature stability: ± 2 ° C
Air flow: 150 liters per minute (maximum)
【Product Description】
1. Portable handheld digital LED display
2. Adjust the keyboard to control the air flow and temperature
3. For nozzle replacement, refer to the instructions for the three types of nozzles (large, medium, and small) that come with the product.
4. If the temperature is below 70 ℃, the rotation can be stopped automatically.
5. High quality strength and long service life
6. Safe welding of QFP, PLCC, BGA and other temperature sensitive components
7. Intelligent guidance and cold air flow function
8. The green line, high quality silicon body and excellent heat dissipation extend the service life and save energy.
9. Portable and digital LED Bga reworkstation with brushless fan, 100W ~ 650W technical data.
ATTEN ST-862D Hot Air Gun Soldering Station Lead-free Intelligent Digital Display 1000W Rework Station For Phone PCB Chip Repair
ST-862D Hot Air station
Feature:
● LCD display screen making control visualization.
● Temperature unite switching function.
● Temperature locking ,timed work function.
● MCU controlled temperature calibration,compensation for constant working .
● Strong air volume with brushless fan.
● Easy to replace with pluggable heater.
● Convertible with straight air and spiral air.
● Auto-sleep function.
Warm tips :
1. Import duties/VAT: Please check with your country\'s customs office to determine what these additional costs will be prior to bidding buying.
2. Import duties, VAT, Taxes and Charges are not included in the item price or shipping charges. These charges are the buyer\'s responsibility.
3. So if send by express delivery such as DHL EMS SF TNT FEDEX ,you might need to pay the tax for you country .
220V Home DIY Multi Purpose Heat Tool Soft Ceramic Hot Air Gun Removing Price Stickers Embossing Sealed
Product parameters
Name: DIY soft ceramic hot air gun
Plug type:EU plug
Power: 300W
EU plug working voltage: 220V
Temperature range: 20~200°C
Air outlet diameter: 12mm
Product application: soft clay, DIY rubber stamp convex powder. Embossed powder, heat shrinkable fil
Precautions for use:
1. Do not blow the item directly at 90 °C with a heat gun.
2. The heat gun should not be used for a long time, usually 2-3 minutes. If the temperature of the fuselage rises, please turn off the heat gun and wait for the cooling to be used.
3. The temperature of the hot air gun can only reach about 200 °C, and it can not be used for industrial use such as small chip components and chip integrated circuit boards.
Precautions for use:
1. Do not blow the item directly at 90 °C with a heat gun.
2. The heat gun should not be used for a long time, usually 2-3 minutes. If the temperature of the fuselage rises, please turn off the heat gun and wait for the cooling to be used.
3. The temperature of the hot air gun can only reach about 200 °C, and it can not be used for industrial use such as small chip components and chip integrated circuit boards.
220V DIY Using Heat Gun Electric Power tool hot air 300W temperature Gun with supporting seat Shrink Plastic DIY tool color
Attention:
1. Do not blow the hot air gun directly at 90° to the object
2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm
3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it
4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits
